Technology Studies Case Study Essay Example | Topics and Well Written Essays - 4500 words

Technology Studies Case Study - Essay Example It is no surprise that moisture is one of the main dilemma of the hotel maintenance department because UK copes up with something like 25,000 gallon of water annually. Nearly all moisture problems are much less severe than they actually look. Moisture can be very dangerous to our health. It can intensify respiratory problems and it can even encourage mites and moulds to grow. The properties of moisture can be very serious and even makes the whole surrounding cold and unpleasant to see. Moisture can be anywhere. They could be on the roof, on the walls, on the floors, windows, doors and pipeline. Oftentimes, the presence Saturated up through permeable materials like concrete hollow blocks into the floors and walls of the home, and it usually occurs in building which did not have any waterproofing in the track of its construction. Consequently, rising moisture can be detected easily. We can conclude that there is rising moisture in the area if, the wall is in contact with the ground, if the walls feel dampy and cold to touch and if there are stains on wall decorations. Nevertheless, rising moisture rarely goes up above one meter on the wall. Penatrating moisture is frequently caused by the building plumbing. The trouble comes in when the water is tolerable to enter the property. Symptoms of rising moisture frequently becomes noticeable during the rainy season. It usually affects roofs, ceilings and walls. Water marks appear if water continues to enter the house. It can be caused by groove or roof problems which had allowed rainwater to trickle in and soak area of walls. This is frequently seen in old houses that has solid wall. Penetrating moisture is very Not easy to find and may require proficient help. There are many ways of treating moisture. Rising moisture is worse at the bottom of a wall than at the top. Aside from blocked airbricks, the most frequent cause is 'bridging", this is when soil from the garden climbs up directly on the house wall and trap moisture. This problem is frequent and it can be easily worked out. Excavate the soil from the house so that the soil can no longer knock against the wall. A technique used in old properties is the inoculation of chemical in the problem areas. If the moisture is getting higher through the floorboard, a moisture-proof membrane maybe frayed so it is best to have a refitting. Penetrating moisture More often than not forms when water get into the property. Check up in details grooves, downpipes, flashings and window frames. It will be best to check everything inside and around the property area. Check the sealing of window frames to make sure that there must be a drip groove to get rid of rainwater. If there are blocks, clear them comprehensively. An ill-fitted roofing on a flat roof will probably cause moisture and a fractured wall can let water in. Repair a fractured wall with protective material and fit insulation rubber to all door frames. Application of Outdoor water proofing fluid will be helpful if the outdoor brickwork is already absorbent. A moisture proof track is also one means of avoiding increasing moisture. This is a process where in two layers of bricks with a space between can avoid moisture. This is frequent